How is this possible? The answer begins with flat plates made of 99.99% pure virgin lead - not lead alloy. Pure lead plates can be made thinner, so we can fit more of them in the battery. More ODYSSEY battery plates mean more plate surface area. And that means more power – twice as much as conventional batteries.
In fact, ODYSSEY batteries are capable of providing engine cranking pulses in excess of 2250 amps for 5 seconds – double to triple that of equally sized conventional batteries, even at very low temperatures. And they can handle 400 charge-discharge cycles to 80% depth of discharge!
This extreme combination of power and performance makes ODYSSEY batteries perfect for a range of applications, including automotive/LTV, marine, commercial, and powersports.
- 1200 cranking amps for 5 seconds
- 1090 cranking amps for 10 seconds
- 900 cranking amps for 20 seconds
- Short circuit current over 2600A
- 44 amp hours
- 78 minute reserve capacity with 25amp load
- SAE Brass Automotive Terminals
- Metal jacket
- Length 7.87"
- Width 6.66"
- Height 6.80"
- Weighs 38 lbs
85, 90, 91, 92, 96R, 97R, 98R, 99R, 121R and 124R. MODIFICATION OF HOLD-DOWN OR CABLES MAY BE REQUIRED TO FIT YOUR VEHICLE
MJ stands for metal jacket. The metal jacket is needed if it's being mounted near heat to protect the plastic of the battery from swelling. The lead plates are under much higher pressure than a lead acid battery and if the plastic heats up, the plates will want to expand outward which can ruin the battery if it doesn't have a jacket.